Standard Applications:
Restricted Trimode
Other Applications:
Open gauging (“O” type) (Non-Toxic product vapors only)
Environmental gauging (“E” type) ( Typical well monitoring vapors only)
These portable FLEXI-DIP® “UTI” gauging tapes provide a convenient and accurate means for measuring ullage, lower oil-water interface and temperature.
MMC’s UTI gauging tapes are capable of detecting all floating and non-conductive hydrocarbons. Each instrument is designed for ease of use. Gauging for liquid or interface level is accomplished simply and quickly.
When the electronic probe is lowered and senses a hydrocarbon, a steady horn tone is sounded and a yellow LED illuminates.
When sensing an oil-water interface or a non-conductive liquid heavier than water, an intermittent horn tone sounds and a red LED starts flashing.
This gauging system is certified as “Intrinsically Safe” for use in all class IIC hazardous atmospheres.
| Specifications: | |
Display Readable Temperature *Reading Limit Due to 3-1/3 Digit LCD Display on °F Range | °F = -40° to 199.9°* °C = -40° to 150.0° |
| Guaranteed Temperature Calibration Range | 32°F to 190°F (0°C to 88°C) |
| Accuracy Over Calibration Range | ±0.2°F (±0.1°C) |
| Accuracy Linear Measurements | ±1/8” (±2.0 mm), Plus ±0.1% of Total Tape Length, worst case |
| Minimum Detectable Tank Bottom Liquid Level | 3/8” (10mm) |
| Minimum Detectable Floating Product Level | 1/8” (3mm) |
| Batteries for Intrinsically Safe Operation Only (Supplied) | Duracell MN1604 |
| Battery Drain (Temperature Mode) | 1.3 ma (In Air) 2.6 ma (In Fluid) |
| Display | 3-1/2″ Digit Liquid Crystal Display 1/2” Character Height |
| Operating Temperature Limit of Liquid Crystal Display | -40°F to 176°F -40°C to 80° |
| Storage Temperature Limits | -67°F to 185°F -55°C to 85°C |
| Available Tape Length | 50 ft (15 m) 65 ft (20 m) 75 ft (25 m) 100 ft (30 m) 100 ft (10ths & 100ths) 40m |
| Hazardous Environments | Certified Intrinsically Safe BASEEFA/SIRA/CSA I, Gas Groups C & D |
